If your project calls for a consistent panelized look—either flush or expressed-seam/reveal—HardiePanel™ siding products offer protection from fire, weather, impact and insects. Use our recommended metal edging to create a sharp reveal/express joint look. HardiePanel siding is a proven product that is a visually stunning exterior surface that’s as low-maintenance and low-cost as it is high-quality. Can be applied directly to the weather resistive barrier/sheathing.

Products

Smooth
Thickness: 5/16"
Weight: 2.3 lbs./sq. ft.

WIDTHS

4' x 8'

4' x 9'

4' x 10'

COLORPLUS®

PRIMED

Stucco
Thickness: 5/16"
Weight: 2.3 lbs./sq. ft.

WIDTHS

4' x 8'

4' x 9'

4' x 10'

COLORPLUS®

PRIMED

Accessories

Vertical Reveal

Supplier: Fry Reglet Corporation
Part Number: FCP - Vertical
Material: Extruded aluminum alloy 6063 T5
Length: 10'
Width: 2 ¾"
Thickness: 0.05"
Weight: .247lbs. / lin. ft.
Finish: Chemical conversion coating (chem.-film), unless otherwise specified. Note: Chem-film coating is required for field painted finish
For more information visit the manufacturer's website by clicking here.

Z Flashing

Supplier: Fry Reglet Corporation
Part Number: FCP - Z Flashing
Material: Extruded aluminum alloy 6063 T5
Length: 10'
Width: 1 7/8"
Thickness: 0.05"
Weight: .095lbs. / lin. ft.
Finish: Chemical conversion coating (chem.-film), unless otherwise specified.
Note: Chem-film coating is required for field painted finish

Outside Corner

Supplier: Fry Reglet Corporation
Part Number: FCP - Outside Cnr
Material: Extruded aluminum alloy 6063 T5
Length: 10'
Width: 1 ½"
Thickness: 0.05"
Weight: .216lbs. / lin. ft.
Finish: Chemical conversion coating (chem.-film), unless otherwise specified.
Note: Chem-film coating is required for field painted finish

Inside Corner

Supplier: Fry Reglet Corporation
Part Number: FCP – Inside Cnr
Material: Extruded aluminum alloy 6063 T5
Length: 10'
Width: 1 2/5"
Thickness: 0.05"
Weight: .163lbs. / lin. ft.
Finish: Chemical conversion coating (chem.-film), unless otherwise specified.
Note: Chem-film coating is required for field painted finish

J Channel

Supplier: Fry Reglet Corporation
Part Number: FCP - J Channel
Material: Extruded aluminum alloy 6063 T5
Length: 10'
Width: 1 1/8"
Thickness: 0.05"
Weight: .108lbs. / lin. ft.
Finish: Chemical conversion coating (chem.-film), unless otherwise specified.
Note: Chem-film coating is required for field painted finish

For more information visit the manufacturer's website by clicking here.